Have you tried any of your local scrapyards? They might be your best bet for a 93 manual. Hope this helps. GuruXJ answered about a year ago. What would cause my ford Taurus limited to have electric windows and sunroof open. Meeting with seller of Ford Taurus SE for test drive this morning.
|Published (Last):||11 May 2009|
|PDF File Size:||3.64 Mb|
|ePub File Size:||10.65 Mb|
|Price:||Free* [*Free Regsitration Required]|
Quick Links. See also: Owner's Manual , Manual. Table of Contents. Instrument Cluster. Warning and control lights. Entertainment Systems. CD changer. Climate Controls. Electronic automatic temperature control. Rear window defroster.
Turn signal control. Bulb replacement. Driver Controls. Steering wheel adjustment. Power windows. Speed control. Message center.
Locks and Security. Owners Guide postfmt. USA fus. Ford may change the contents without notice and without incurring obligation. Page 4: Introduction The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it. Page 5 Do not add friction modifier compounds or special break-in oils during the first few thousand miles kilometers of operation, since these additives may prevent piston ring seating.
See Engine oil in the Maintenance and Specifications chapter for more information on oil usage. To access this information, special equipment must be directly connected to the recording modules. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent, Page 7 By referring to the pages in the provided supplement, you can properly identify those features, recommendations and specifications that are unique to your vehicle.
Refer to Fuel filler cap in the Maintenance and Specifications chapter. A chime will also sound to remind you to fasten your safety belt. Charging system: Illuminates when the battery is not charging properly.
Never remove the coolant reservoir cap while the engine is running or hot. EJ Eject : Press to eject a tape. If this happens, reinsert the disc holder back into the magazine while pressing on the lever. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper adhesive labels should not be inserted into the CD player. Page Climate Controls 4. Fan speed adjustment: Controls the volume of air circulated in the vehicle.
For more information, refer to Rear window defroster later in this chapter. Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop. Recirculation may turn off automatically in all airflow selections. Temperature control: Press to increase or decrease the temperature in the cabin. The set point temperatures in Celsius will be displayed in one degree increments.
For more information, or to replace the filter, see your Ford or Lincoln Mercury dealer. Failure to activate your headlamps under these conditions may result in a collision. Move the control to the full upright position, past detent, to turn on the interior lamps.
On the wall or screen you will observe an area of high intensity light. The top of the high intensity area should touch the horizontal reference line, if not, the beam will need to be adjusted. Remove the bolt 1 from the headlamp housing. At the back of the headlamp, pry up and remove the two retainer pins to release the headlamp assembly from the vehicle and pull headlamp forward.
Remove the bulb retaining ring by rotating it counterclockwise. Remove the old bulb from the lamp assembly by pulling it straight out of the lamp assembly. Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again.
Remove two screws and the lower trim panel from the liftgate. Remove the upper trim panel. Remove the rubber plug from the lower access hole in the upper portion of the liftgate.
Remove the two outboard grommets from the inside of the decklid. On the inside of the decklid, remove the three nuts that hold the spoiler on and remove the spoiler. Carefully twist and pull the socket from the lamp housing.
Carefully pull the bulb from the socket and push in the new bulb. Reinstall the socket in the lamp housing and twist to secure.
Carefully push the carpet back in to place and install the plastic cover inside the trunk with five push pins and two plastic mushroom nuts. Pull the bulb straight out of the socket and push in the new bulb. Install bulb socket in lamp assembly by turning clockwise. Carefully install the tail lamp assembly on the body side panel and secure it with two bolts.
Press the wiper control to activate the rear wiper. Press again to turn off the wiper. The layer of ice has many sharp edges and can damage the micro edge of the wiper rubber element. To prevent the battery from being discharged, do not use the power point longer than necessary when the engine is not running.
Press completely down on AUTO and release quickly. Press again to stop. Do not block the sensor on the backside of the inside rear view mirror since this may impair proper mirror performance. Press the ON control and release 2. Accelerate to the desired speed. This will automatically return the vehicle to the previously set speed.
Each tap will decrease the set speed by 1 mph 1. They may seriously hurt themselves. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmission of the radio-frequency signal. The name and color of the button may vary by manufacturer.
The indicator light will flash slowly and then rapidly after HomeLink accepts the radio frequency signal. The indicator light will begin to flash after 20 seconds. For questions or comments, contact HomeLink at www. Determine your magnetic zone by referring to the zone map. Displayed when the fuel filler cap is not properly installed.
Check the fuel filler cap for proper installation. Hard objects can injure you in a collision. Page 67 To remove the floor mat, reverse the installation procedure. Cargo cover if equipped Wagon Your vehicle may be equipped with a cargo area shade that covers the luggage compartment of your vehicle.
Fold the edges of the vinyl towards the center, making sure that the edges clear the end cap slots. Use tape or a rubber band to hold the vinyl to the left side of the tube. Loosen the thumbwheel at both ends of the cross-bar. Slide the cross-bar to the desired location. Tighten the thumbwheel at both ends of the cross-bar. Use adjustable tie down loops to secure the load. If the procedure needs to be repeated, you must wait 30 seconds.
Note: All doors must be closed and remain closed throughout the process. Small children are particularly at risk. If the dome lamp control is in the off position the illuminated entry feature will not work. Opening the trunk Press once to unlock the trunk or liftgate wagon. Replacing the battery The remote entry transmitter uses one coin type three-volt lithium battery CR or equivalent.
looking for an owners manual
Ford Taurus Owner's Manual